Multi Fuel Stoves With Back Boiler
A multi-fuel stove equipped with a back boiler can be used to warm your home and provide hot water. They have 2 water ports (1x return & 1x flow) that are 1 inch BSP in size and can be connected using standard compression fittings.
Features
Multi fuel stoves can be paired with back boilers to burn a variety of different materials, other than logs. This gives you a greater choice of heating sources and also helps reduce the carbon footprint. This is because multi fuel stoves were designed to accept a larger variety of substances and be more efficient in burning them than wood-burning stoves. In addition to the standard logs multi fuel stoves that have a back boiler will be capable of burning smokeless coal anthracite, and peat or turf briquettes. These devices can either be fitted with raised grates that have moving bars, or with a central riddling grates and asphan. Both of these will let the stove de-ash frequently. The ash will be kept in an asphan below the combustion area, allowing for easy and safe removal.
Boiler stoves can provide the ability to heat up to 21kw (14kw for water heating and 7kw for space heating) depending on the model selected. They can be connected into a hot accumulator tank or a conventional boiler system that allows them to work in conjunction with solar panels, if needed. The boiler is located within the stove and is normally on the side or back of the firebox. It is made out of steel that is rolled thickly, not fragile cast iron.
This means that it's built to withstand greater temperatures than cast iron stoves, and therefore is less prone to corrosion. The boiler is pre-fitted or purchased separately. There are typically two pipes (or sometimes four) that extend out from the rear of the stove to connect to plumbing pipes.
These pipes can be connected to the hot water cylinder or directly into the radiator circuit of your home, and pumps will switch on when the temperature in the tank reaches a certain level. This will ensure that your radiators are heated first before hot water for cooking and bathing is provided - a good method to keep your bills low while also preventing cold winter conditions.
Benefits
The addition of a back boiler multi fuel stoves provides additional benefits to heating your home. In addition to the heat that it generates from burning wood and other kinds of solid fuel, a multi fuel stove that has a back boiler is also able to heat your hot water system. You can reduce the amount of oil, gas or electricity you use at home, and also reduce carbon emissions.
The heat generated by a multi-fuel stove with a back boiler is used to pre-heat the incoming cold water that feeds into it through the bottom. The hot water can be used to heat the home, and even for bathing and domestic hot water taps.
If properly installed the boiler can be used to heat water for central heating systems, thermal store or small or large central heating systems. This will increase energy efficiency in your home and reduce energy bills. It can also be combined with underfloor heating or solar panels to further reduce your home's energy costs and carbon footprint.
Multi-fuel stoves with back boilers can be used as an easy wood-burning system for central heating or to connect to an accumulator tank. It is a flexible and cost-effective method of heating your home. You can even integrate log burners and back boiler with your gas central heating system to save on the installation and running expenses.
Stoves that are eco-friendly can use up to six times less fuel than previous models, and can assist you in saving on your fuel costs and also cut down on your environmental impact. There are a variety of models available, from those that simply heat water to those that can heat up to 22 radiators as well as provide hot water for your entire household.
Most multi fuel stoves equipped with a back boiler feature an easy bolt-in system that has two pipes that protrude from the back of the stove ready to connect to the plumbing pipework. Other styles have a 'water-jacket which means that the body of the stove is surrounded by a cavity that can be filled with hot water, and sometimes with an electric pump.
Installation
The Ruben is a stunning stove with a large ceramic glass window with silver door handles/controls, and an integrated back boiler that can be used for central heating and hot water (upto 7kw to water heating and 8kw for room heating). The Ruben features two water ports on the rear of the stove (one for flow and the other for return) which are both sized 1.0 inch BSP. It can be used on either vented or unvented stoves.
A multi-fuel stove equipped with a back boiler is connected to central heating systems by with a simple non-return valve or to a thermal storage tank with an overheat valve. A thermal storage tank is a water tank that is insulated and acts as a neutral for the heat generated by the stove. It holds the heat until it is required.
To fit a wood burner with back boiler you will be required to confirm that your local authority is able to allow it and that any insurance company is satisfied with the work carried out on a non-listed stove with back boiler. You will also need to make sure that your plumbing system is able to handle the additional power that is going to be generated. In most instances, you will need to replace the plumbing in order to achieve this.
If your installer is skilled in this kind of work, they will be able give you advice on what you need to do. Beware of sanitary plumbers who claim to be solid fuel heating engineers and may not understand the fundamentals involved in this type of system. Stovesellers has been asked many times to repair the mess left by other tradesmen. We only advise you to choose a competent engineer.
It is important to be aware that you will require a higher capacity cylinder for a multifuel stove that has a back boiler. Also, the heat output of the stove must be adjusted to the house so that you do not run out of water and spending money. Divide the total cubic meter (length, width, and height) of the room by 14 to determine the model.
Maintenance
A multi-fuel stove with back boiler is a stove which can heat hot water and radiators. These stoves are great for people who live in smaller properties or need to reduce their carbon footprint by not being dependent on gas central heating systems.
The back boiler of these stoves is a large loop of pipe that connects the hot water tank as well as the radiators in your home. A thermostat in the home is able to monitor the temperature of the loop and when it is at a certain level, the pump for the radiators will be turned on automatically. This will ensure that your heating is in control and prioritised.
One of the most appealing aspects about a multi fuel stove with back boiler is that it allows you to burn both wood and coal, allowing you to have greater flexibility when it comes to the heating sources you use. It is important to remember that the boiler doesn't provide free energy and you must add enough logs to meet your needs.
It is important to follow the safety guidelines for your area and in the country when installing a multi-fuel stove that has a back boiler. This includes the distance and location of your stove in relation to areas that are combustible. These guidelines can be found in the instruction manual for your stove or by consulting local codes.
When installing Recommended Web site -fuel stove, which has a back boiler, homeowners often make the mistake of not correctly making the hearth. This can cause a lot of problems in the future, so it's important to follow the correct procedures.
The best way to ensure that your multi fuel stove with back boiler is installed properly is to have it installed by a registered heating engineer or HETAS technician. They can ensure that the stove is compatible with your existing system and also ensure that it meets all UK safety standards.